ISO 9001:2008 Certified Company
TAM Completion Systems
FREECAP Tool Applications
FORM #SF-17 REVISION H

Form must be completed before
technical proposal or quotation can be provided.

* Indicates required field
Company Well
Address Location
Contact Name* Phone*
Date Fax
Email*
Quotation required via
Quotation by
Time
Date
Equipment required by Date
TAM Salesperson
Third Party Inspection Required
Yes No
Objective
Wellbore Configuration (One IPAD per packer size)

Casing

 Open Hole Section FREECAP Mandrel
in mm

Casing OD

 ID as Drilled
OD
Casing Wt
 ID as Calipered
 Weight
Casing ID
 Deviation
 Grade
Minimum Restriction
 Max. DLS
 Thread
Depth Set
 MD/TVD
 Centralizer OD
 *Must be in US measurement
FT M
Mud Type
Packer to be set in
I.D.
 Cased Hole
 Open Hole
 Setting Depth
Maximum differential pressure across packer
 Static BHT
 BHP
Bar PSI KPa
DEG C DEG
Bar PSI KPa
Time to Run In Hole
 Desired time to set to reach differential press ra
Desired Tool Type:
FREECAP I (Wrap on Casing) (indicate number of tools next to seal length)
Standard Seal Length
3 ft. 5 ft. 10 ft. 15 ft. 20 ft. other
FREECAP II (Slide on Sleeve) (indicate number of tools next to seal length)
Standard Seal Length
1 ft. 3 ft.
Produced Wellbore Fluid Fluid to Swell Packer Additional Information
Oil-Gravity (sg) Type
%H2S %CO2
Water-Salinity (%)
 Gravity (sg)
 Submit Sample of Swelling Fluid
YES NO
Gas-Gravity (sg)
 Salinity %
 PVT Data Available
YES NO
In addition to the above data, please provide:
1.proposed wellbore sketch 2.mud report 3.open hole caliper
4620 Southerland, Houston, Texas 77092 • PH: (713) 462-7617 or (800) 462-7617 FAX: (713) 462-1536

Email: info@tamintl.com

Joomla Professional Work
© TAM International, Inc. 2012