TAM inflatable tools are available in single and/or straddle configurations to isolate specific customer intervals in open or cased holes for selective treating, squeezing or testing as desired.

Test, Treat or Squeeze
Inflatable treat and test tools are available for a wide variety of applications: 

• In single and straddle configurations
• For hole sizes from 2” through 30”
• For open hole and cased hole applications in vertical or horizontal wells
• With expansion capabilities in excess of 2:1
• Can be run on drill pipe, tubing or coiled tubing

Selective Test & Treat
 

Open Hole Applications Selective Test or Treat - Acidizing Selective treating required in horizontal well to remove formation damage due to drilling operations Selective Test or Treat - Swabbing Selective testing required in horizontal well to define water source and design a remedial program Multi Lateral Isolation One or more legs of multi lateral producing water Selective Testing – Jet Pump Selective testing required in horizontal well to define water source and design a remedial program Multi Lateral Isolation One or more legs of multi lateral producing water Selective Completion Vertical well completed in long reservoir interval or multiple zones require zone isolation without cementing Intelligent Well Intelligent Well completion requires open hole zone isolation Selective Testing – Stress Measurement Perforations plugged, or skin damage detected on well test analysis - Acid stimulation required

Cased Hole Applications Selective Water Shut Off – Screened Completion Lower screen section of gravel packers oil well completion producing excess water Straddle Test & Treat Screen/gravel pack plugged: Acid stimulation required Straddle Test & Treat – Scale Build Up Perforations plugged with scale buildup requires acid stimulation Straddle Test & Treat – Multiple Perforations Multiple perforation completion producing excess water requires selective testing to plan remedial operations Straddle Test & Treat – Jet Pump Open hole completion suspected of producing excess water from heel, below casing shoe Temporary Plug Testing Lower perforations suspected of producing water

Squeeze

Open Hole Applications Open Hole Plug Back End of lateral (toe) producing excess water   Open Hole Plug Back – Lost Circulation Severe lost circulation encountered while drilling lateral Multi Lateral P&A Complete plug and abandonment of a multi- lateral well to prevent future downhole cross flow between wells Open Hole Hydraulic Fracturing Coal bed methane well required hydraulic proppant fracturing of multiple beds

Cased Hole Applications Shoe Squeeze Large diameter casing shoe requires squeeze cementing Perforation Squeeze Lower perforations producing excess water, suspected poor cement between zones, isolation required. Plug and Abandon (P&A) Due To Corroded Tubing Permanently P&A an existing well with corroded tubing without using a rig Selective Water Shut Off – Screened Completion Lower screen section of gravel packers oil well completion producing excess water